CAN fault detection ME - fault code description - AD07.61-P-4000-32LC

1	Fault code ( Readout on generic scan tool)	P2031 CAN message from steering column module (N80) missing or faulty (P0600)
2	Fault storage	After expiry of test duration and fault
	Activation of the engine diagnosis indicator lamp (EURO3/4) or CHECK ENGINE (MIL) malfunction indicator lamp	No activation
3	Checking frequency	Continuous
4	Checked signal or status	Signals from the cruise control pushbutton switch variable or from the cruise control pushbutton switch are detected by the steering column module and transmitted via the CAN to the engine control unit.
	Checking duration	Approx. 10 seconds