CAN fault detection ME - fault code description - AD07.61-P-4000-32AC
| 1 | Fault code ( |
P207B CAN message regarding selector lever position from EGS control unit (N15/3) missing or faulty (-) |
| 2 | Fault storage | After expiry of test duration and fault |
| Activation of the engine diagnosis indicator lamp (EURO3/4) or CHECK ENGINE (MIL) malfunction indicator lamp |
No activation | |
| 3 | Checking frequency | Continuous |
| 4 | Checked signal or status | The information selector lever position is exchanged between the engine control unit and EGS control unit. This communication is monitored. |
| Checking duration | Approx. 1 second |