Connect compression tester Information on preventing damage to electronic components due to electrostatic discharge - AR01.10-P-0010-01V

Fig 1: Identifying Compression Recorder (001 589 76 21 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Electrical Connection Set (201 589 00 99 00)

Courtesy of MERCEDES-BENZ USA

1. Remove cover on fuse and relay module.
2. Clip connection terminal (A) of compression tester onto circuit 30, 15, 61 terminal block (3-pin) (X12/3).
3. Pull starter relay (2) out of the fuse module (relay place 8).
4. Connect adapter line (1)with terminal 87 in relay place 8 of the fuse module.
5. Connect adapter line (1) to the cable of the compression tester.

Fig 3: Identifying Starter Relay & Fuse Module

Courtesy of MERCEDES-BENZ USA