Remove, install door foil on rear door - AR72.12-P-0105GI

MODEL 163.113 /128 /136 /154 /172 /174 /175 

Inner door foil 

Fig 1: Identifying Rear Inner Door Foil Components

	Remove
1	Remove rear door liner		AR72.12-P-1010GH
2.1	Remove fixed window in rear door	Only if removing rear  door foil (1). Do NOT separate fixed window glass (2) from rubber frame.	AR72.12-P-1970GH
2.2	Pull out front of window guide rail (3)	Only if removing front  door foil (4).
3	Carefully and evenly heat inner door foil (1, 4) to be removed	Do not damage paint.
			*WH58.30-Z-1004-20A
4	Remove inner door foil (1, 4)	Door foils cannot be reused.
			Figure
	Install
5	Clean door sheet metal in area where inner door foil (1, 4) is to be installed
6	Install new inner door foil (1, 4)	Ensure proper positioning.
7.1	Reinstall front of window guide rail (3)	Only if removed.
7.2	Reinstall fixed window in rear door	Only if removed.	AR72.12-P-1970GH
8	Reinstall rear door liner		AR72.12-P-1010GH

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)