Removing and installing switch for pop-up/sliding roof - AR77.20-P-0001GH

MODEL 163 with CODE (414a) Electric glass pop-up/sliding roof 

Fig 1: Switch For Pop-Up/Sliding Roof Component

	Removal, installation
1	Remove overhead control panel (1)		AR82.20-P-1100GH
2	Remove sliding/pop-up roof switch (S13/2) from overhead control panel control module (1)	Unscrew screws (2) from overhead control panel (1)
3	Disconnect connector (X18/2)
4	Install in opposite order