Removing and installing inside rearview mirror - AR68.40-P-0001GH

MODEL 163.136 /154 /172 #A up to 145272, 163.136 /154 /172 #X up to 708318 

Fig 1: Identifying Inside Rearview Mirror Components

	Remove/install
1	Disconnect connector (H7/1x1) from rear of inside rearview mirror (H7/1)	Only with code (249a), automatic dimming inside rearview mirror
2	Remove cable duct (1) from mirror shaft	Only with code (249a), automatic dimming inside rearview mirror
3	Push cable duct (2) together and remove	Only with code (249a), automatic dimming inside rearview mirror
4	Turn mirror shaft 90 degrees and pull out of mirror base (3) downward	Inside rearview mirror is arrested on mirror base with spring tension
5	Install in the reverse order