Remove/install center console - AR68.20-P-2000GH

MODEL 163.113 /128 /136 /154 /157 /172 /174 /175 

Fig 1: Identifying Center Console Housing And Screws

Fig 2: Identifying Center Console Screws

Fig 3: Identifying Left And Right Rear Power Window Switch

	Remove, Install
1	Remove armrest cover from center console		AR68.20-P-2370GH
2	Remove cover on gearshift lever	Up to 31.08.01	AR68.20-P-2310GH
		As of 01.09.01	AR68.20-P-2310GI
3	Unscrew screws (2) from front of housing (1)
4.1	Disconnect electrical connector on right and left rear power window switches (S21/15s1 and S21/15s2)	Up to 31.08.01: Remove wiring harness from mount.
4.2	Disconnect connector from floor in center console	Up to 31.08.01: Remove wiring harness from mount.
5	Unscrew screws (4) from rear of housing (1)
6	Remove housing (1)	Set selector lever to position N Installation:  As of 01.09.01, ensure that air duct is installed tightly.
7	Install in the reverse order