Move wiper motor to parking position - AR82.30-P-6800-01E

Illustrated on model 163 

Fig 1: Identifying Wiper Motor Connector And Wiper Motor

Fig 2: Identifying Wiper Motor Connector

Fig 3: Identifying Wiper Motor

1. Connect wiper motor (M6/1) to wiper motor connector (1).
2. Hold wiper motor (M6/1) using the left hand.
3. Switch on ignition.
4. Set combination switch to "stage 1".
5. Turn combination switch back to "level 0".
6. If the wiper motor (M6/1) is in the park position, switch off the ignition.
7. Detach wiper motor connector (1) from wiper motor (M6/1).