Retrofit wiring harness. - AZ82.70-P-0001-04G

MODEL 163 as of 1.10.01 

1. Prepare portable cellular telephone wiring harness (2) as shown in figure
   Fig 1: Identifying Portable Cellular Telephone Wiring Harness

   
2. Bolt FSE interface (3) to interface bracket (15) with 2 torx bolts (16).
3. Connect portable CTEL wiring harness (2) to FSE interface (3).
   Fig 2: Identifying Portable CTEL Wiring Harness And Components

   
4. Unscrew sheet metal screws (30) from instrument panel.
5. Install mount (15) together with interface between mounting lugs (31) and (32) as shown in figure and fasten with sheet metal screws (30).
6. Route connection plug for adapter wiring harness (D) upward into the radio recess.
   Fig 3: Identifying Mounting Lugs And Sheet Metal Screws

   
7. Connect portable cellular telephone wiring harness (2) to adapter wiring harness (9).
8. Check fuse (23) (a 10A fuse should be present).
   Fig 4: Identifying Fuse And Telephone Wiring Harness

   
9. Connect adapter wiring harness (9) to radio connector.
   Fig 5: Identifying Portable Cellular Telephone Wiring Harness And Connector For Adapter Wiring Harness