Retrofit fiber optic cable wiring harness - AN82.70-P-0002-01GH

Connection diagram of fiber optic cable 

1. Prepare fiber optic cable wiring harness (30) as shown in figure.

   The vehicle is preinstalled with a fiber optic cable for the CD player with changer. This fiber optic cable is tied back in the radio slot and is not required in this case.

   Fig 1: Identifying Connection Diagram Of Fiber Optic Cable

   
2. Connect fiber optic cable wiring harness (30) to the CTEL interface (A34/4).
3. After installing CTEL interface (A34/4) in the center console, route fiber optic cable wiring harness (30) into the radio slot.
4. Connect wiring harness when installing radio (A2) or COMAND (A40/3).
   Fig 2: Identifying CTEL Interface And Fiber Optic Cable Wiring Harness