Volume/tone adjustments, function - GF82.60-P-2003B

MODEL 163, 168, 170, 203.0 /2 /7, 208, 209.3 /4, 210 with CODE (353) Audio 30 APS 

Basic features 

The balance and fader settings apply for all signal sources (radio, CD, voice output).

The base and treble settings can be stored separately for the following signal sources:

• Radio
• Traffic announcements
• Navigation voice output
• Integrated CD player
• Optional CD changer

Volume and tone settings for traffic announcements 

The volume for traffic announcements can be changed during a traffic announcement (procedure analog to adjusting navigation system voice output).

Volume and tone settings for navigation system voice output 

The volume is automatically increased by a defined level during voice output. The volume level increase can be set in stages directly at the radio (A2). The radio is preset to 6 dB.

During voice output, the volume can be changed with the left knob. The base/treble settings can be changed with the right knob after pressing the "tone" button (during voice output). The settings can be continued after conclusion of the voice output; the setting mode is terminated 8s after actuating the last button.