Remove/install headlamp unit - AR82.10-P-4730GH

MODEL 163.113 /128 /136 /154 /157 /172 /174 /175 

Fig 1: Identifying Headlamp Unit Components

	Remove/Install
1	Open engine hood
2	Unlock cover (1) at the clip (arrow A) under the lamp unit and unhook	Installation:  Lock clip again.
3	Unscrew screw (2)
4	Unscrew nuts (3).	Installation:  Align the lamp unit so that the distance of the cover to the bumper is even.
5	Unhook left front headlamp unit (E1) or right front headlamp unit (E2) from the hole (arrow B) using drift (4) and pull forwards
6	Disconnect headlamp harness connector (X24)
7	Remove headlamp unit toward front
8	Install in the reverse order
9	Perform function check
10	Check and correct headlamp adjustment
	Check and correct headlamp adjustment		AP82.10-P-8260GH