LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2000 >> ML430 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Electrical System - Body -- 163 Chassis >> Testing & Repair >> Coding radio - AR82.60-P-7502-01GH

Coding radio - AR82.60-P-7502-01GH

  1. If the power supply to the radio is interrupted the radio will not operate when reconnected. After switching on the ignition the word "CODE" appears on the radio display.
  2. The code number for this radio is given on the included code card.
  3. Enter the code number with the station buttons, e.g. number 1 = station button 1..
  4. After entering the first digit the word "CODE" disappears and the number entered is displayed followed by four dashes. Enter the next numbers with the corresponding station buttons. After entering the five digit code number compare the code number with the number on the display. At this point the code number can be written over as frequently as necessary for correction. If the wrong code number has been entered, enter the entire code number again.
  5. Confirm entry of correct code number with " < " or " > " button.
  6. If the wrong code number has been entered and confirmed the word "CODE" appears again on the display and the code must be entered again.
  7. After entering the code incorrectly three times the word "WAIT" appears on the display and the radio is disabled for approx. 10 minutes. After entering the incorrect code three times again the radio is disabled for approx. 60 minutes.

    IMPORTANT The disable time runs down only with the radio switched off.