Change rear dome lamp - AR82.20-P-0113-01GH

1. Put dome lamp on workbench.
2. Remove all stiffening ribs (1) on edge.

Only for vehicles with lamella roof, code 417a. 

1. 3.1 Measure 13 mm (a) from the front edge and mark.

   Only for vehicles with lamella roof, code 417a. 

2. 4.1 Cut dome lamp at the mark.
3. 5 Deburr all cutting edges.
   Fig 1: Identifying Rear Dome Lamp Stiffening Ribs On Edge