Wiper system test of electrical system wiper positions combination switch - AD82.30-P-6002-09GH
| Scope of test | Measuring instrument/ Test connection | Operation/ Requirement | Specified value |
|
|||
| 1.0 | Rest position Contact 1 |
15 | 19 | Combination switch (S4) in rest position | < 1 Ω |
|
|
| 1.1 | Intermittent wipe Contact 2 |
15 | 19 | Combination switch (S4) in "Intermittent wipe" position | < 1 Ω |
|
|
| 1.2 | Tip wipe Contact |
15 | 18 | Combination switch (S4) in "Tip wipe" position | < 1 Ω |
|
|
| 1.3 | Wipe stage 1 Contact |
15 | 18 | Combination switch (S4) in "Wipe stage 1" pos. | < 1 Ω |
|
|
| 1.4 | Wipe stage 2 Contact |
17 | 18 | Combination switch (S4) in "Wipe stage 2" pos. | < 1 Ω |
|
|
| 1.5 | Intermittent wipe Contact 1 |
16 | 18 | Combination switch (S4) in "Intermittent wipe" position | < 1 Ω |
|
|