Removing and installing side window between C- and D-pillars - AR67.30-P-2301GH

MODEL 163 

Fig 1: Identifying Side Window Between C- And D-Pillars

	Removal
1	Remove side window	Do not damage seal, secure window against falling down Press seal behind window opening and continue in direction indicated by arrow until window is removable
			Fig 2
	Installation
2	Install window	Do not damage seal. Pull seal over window cutout with cord. Helper should exert slight pressure to secure the window while the seal is pulled over the window cutout.
	Test
3	Check for leaks

Fig 2: Identifying Installation Wedge (110 589 03 59 00)