Clean fabric upholstery - AP91.18-P-1000-03A

all 

Work procedure: 

Brush seat regularly and clean with vacuum cleaner. Remove dirt and stains immediately if possible.

Remove dry dirt, such as dust, ash and the like using a vacuum cleaner. If this is not possible, e g. with deep-seated dry dirt, brush seat with a nylon or natural hair brush (not a metal brush) and vacuum. Clean severe stains and soiling with a washing solution first. Absorb the washing solution with an absorbent rag and dry (if necessary with a hair drier). If this is not successful, after drying re-clean using MB spot remover. Use a rag soaked in MB spot remover.

Absorb dissolved stain substance in general with an absorbent rag and dry.

The spots cannot always be removed without an outline forming. In such cases, the individual stained areas, the entire part or the entire area must be cleaned uniformly.