Removing and installing outside rearview mirror cover - AR88.70-P-9040GH

MODEL 163.113 /136 /154 /172 /174 up to 31.8.01 

Fig 1: Identifying Outside Rearview Mirror Cover Components

	Remove/install
1	Remove mirror glass		AR88.70-P-9020GH
2	Release catch in mirror housing (3)	Press mirror housing out of frame (1)with slight pressure
3	Release paneling for mirror housing (2) from frame (1)	Outer catch (4) only accessible if mirror housing is pivoted toward door
4	Remove mirror housing paneling (2)
5	Unscrew screw (5) from frame (1)	Torx bit set	Fig 2
6	Unclip frame (1) from mirror actuator motor	Pivot mirror housing back to initial position. Unclip clips (6) from actuator motor.
6	Remove frame (1)
7	Install in the reverse order

Fig 2: Identifying Torx Bit Set (000 589 01 10 00)