Remove/install rear door liner - AR72.12-P-1010GH

MODEL 163.113 /128 /136 /154 /157 /172 /174 /175 

Fig 1: Identifying Rear Door Liner Components

	Remove/install
1	Open crank window
2	Remove cover for door handle (1)
3	Unscrew screw (2)
4.1	Unclip SRS panel and unscrew screw (9)	As of vehicle identification number A145273, X708319.
5	Press door liner (3) off of bottom, front and rear inner door panel with assembly wedge (7)	Position assembly wedge directly next to clips
		Assembly wedge	Figure
6	Lift door liner (3) up and out
7	Unhook control cable (4) on inner door actuating mechanism
8	Unclip inner lock (5) on door liner (3)
9.1	Remove entrance lamp (8)	As of vehicle identification number A145273, X708319.
10	Lay down door liner
11	Check foil and sheet metal clip nuts on inner door panel	Replace damaged foil. Replace all clips.
12	Install in the reverse order

Fig 2: Identifying Assembly Wedge (110 589 03 59 00)