Radio frequency/electric central locking (RFL) diagnosis operational check - AD80.35-P-3005GH
MODEL 163
| Diagnosis, previous knowledge | AD80.35-P-2001GH | ||
| I | Battery voltage 11 - 14 V | ||
| II | Fuses in order | ||
| III | AAM voltage supply in order | AD54.21-P-6000-01GH | |
| Function check | |||
| Scope of test | Operation/Requirement | Specified value | Possible cause/Remedy |
| 1 Drive authorization |
Insert transmitter key in ignition lock | ATA status indicator (E33) flashes briefly at intervals of 1 second | Transponder recognition AAM fault memory AD54.21-P-4000GH Display AD80.50-P-6000-07GH |
| 2 Central locking remote control |
Refer to central locking diagnosis | AD80.20-P-3001GH | |
| 3 Start enable |
Start vehicle | Vehicle starts | Transponder recognition or AAM-MSG code replacement via CAN ==> AAM fault memory AD54.21-P-4000GH |
| 4 Trigger panic alarm |
Press panic alarm button on transmitter key. | ATA triggers panic alarm. Two-tone horn (H1) for 30 seconds and turn signal indicators for 3.5 minutes. The interior lighting is also switched on | AD80.35-P-6001-01GH AD80.35-P-5001GH |