Connecting and disconnecting quiescent current retention unit - AR54.10-P-1030-07I

Illustrated on model 220 

1. Switch on quiescent current retention unit (7).

   Quiescent current retention unit, refer to GOTIS:

2. Connect quiescent current retention unit (7) as follows:
   • Connect positive terminal (8) of quiescent current retention unit to positive cable of battery.
   • Connect negative terminal (9) of the quiescent current retention unit to battery ground (W10).
3. Disconnect negative terminal at battery and insulate negative terminal with insulation tape.
4. Disconnect positive terminal at battery (only if battery is removed).
   Fig 1: Identifying Quiescent Current Retention Unit, Positive And Negative Terminal Shows On Model 220