Pneumatic brake booster test specifications - BE43.10-P-1000-01A
Model 129, 140, 163, 168, 170, 171, 202, h 203, 208, 210, 211, 215, 219, 220, 221, 414
Modification notes
| 14.8.06 | Brake booster dia. | Model 216 | |
| Brake booster dia. | Model 221 |
Pneumatic brake booster test specifications
| Number | Designation | Model 129.05/06 (ATE T52/4A 225-210 or Lucas LSC 115) | Model 129.076 (ATE T52/4A 225-210) | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01A | Brake booster dia. | mm | 203/2286 | 203/2286 | |||
| inch | 8/9 | 8/9 | |||||
| BE43.10-P-1002-01A | Boost factor | ≈5,6 | ≈5,6 | ||||
| BE43.10-P-1003-01A | Brake pipe line pressure | Intake manifold vacuum | Force on brake pedal | 50 N | bar | 14 to 25 | 14 to 25 |
| 0.75...0.8 bar | 100 N | bar | 35 to 45 | 35 to 45 | |||
| 150 N | bar | 53 to 63 | 53 to 63 | ||||
| 200 N | bar | 71 to 81 | 71 to 81 | ||||
| 250 N | bar | 87 to 98 | 87 to 98 | ||||
Pneumatic brake booster test specifications
| Number | Designation | Model 140.02/03/1 (ATE T52/4A 225-210 or Lucas LSC 115) | Model Series 140.04/05/06/07 (ATE T52/ 4A 255-225) | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01A | Brake booster dia. | mm | 203/2286 | 228.6/254 | |||
| inch | 8/9 | 9/10 | |||||
| BE43.10-P-1002-01A | Boost factor | ≈5,6 | 6.85 | ||||
| BE43.10-P-1003-01A | Brake pipe line pressure | Intake manifold vacuum | Force on brake pedal | 50 N | bar | 14 to 25 | 13 to 25 |
| 0.75...0.8 bar | 100 N | bar | 35 to 45 | 35 to 47 | |||
| 150 N | bar | 53 to 63 | 57 to 69 | ||||
| 200 N | bar | 71 to 81 | 78 to 92 | ||||
| 250 N | bar | 87 to 98 | 95 to 105 | ||||
Pneumatic brake booster test specifications
| Number | Designation | Model 163 | Model 168 | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01A | Brake booster dia. | mm | 279 | 203 | |||
| inch | 11 | 8 | |||||
| BE43.10-P-1002-01A | Boost factor | ≈ 5,6 | ≈4,5 | ||||
| BE43.10-P-1003-01A | Brake pipe line pressure | Intake manifold vacuum | Force on brake pedal | 50 N | bar | 9 to 20 | 12 |
| 0.75...0.8 bar | 100 N | bar | 36 to 48 | 30 | |||
| 150 N | bar | 53 to 68 | 50 | ||||
| 200 N | bar | 70 to 85 | 63 | ||||
| 250 N | bar | 82 to 96 | 70 | ||||
Pneumatic brake booster test specifications
| Number | Designation | Model 170.435/444/445/447/449/465/466 | Model 171 | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01A | Brake booster dia. | mm | 254 | 177,8/203 | |||
| inch | 10 | 7/8 | |||||
| BE43.10-P-1002-01A | Boost factor | 4.5 | ≈ 5,6 | ||||
| BE43.10-P-1003-01A | Brake pipe line pressure | Intake manifold vacuum | Force on brake pedal | 50 N | bar | 13 to 23 | 7.5 to 11.5 |
| 0.75...0.8 bar | 100 N | bar | 32 to 44 | 25 to 31 | |||
| 150 N | bar | 48 to 62 | 42.5 to 50 | ||||
| 200 N | bar | 62 to 78 | 59.5 to 70 | ||||
| 250 N | bar | 75 to 91 | 74 to 87 | ||||
Pneumatic brake booster test specifications
| Number | Designation | Model 202.018 to 9/93 and model 202.120/121/122/125 to 04/94 (Lucas LSC 65 or Bendix Isovac dia. 225) | Models 202.02/078/08/128/13/18/19 Model 202.018 as of 10/93 Models 202.120/121/122/ 125 as of 05/94 (ATE T52/4A/255 or Lucas LSC 80) | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01A | Brake booster dia. | mm | 228.6 | 254 | |||
| inch | 9 | 10 | |||||
| BE43.10-P-1002-01A | Boost factor | 3.85 | 4.5 | ||||
| BE43.10-P-1003-01A | Brake pipe line pressure | Intake manifold vacuum | Force on brake pedal | 50 N | bar | 7 to 15 | 13 to 23 |
| 0.75...0.8 bar | 100 N | bar | 26 to 38 | 32 to 44 | |||
| 150 N | bar | 43 to 58 | 48 to 62 | ||||
| 200 N | bar | 62 to 75 | 62 to 78 | ||||
| 250 N | bar | 78 to 88 | 75 to 91 | ||||
Pneumatic brake booster test specifications
| Number | Designation | Model 203.004/006/035/045 | Model 203.016/061/064/076/081/084/087/092/261/276/281/284/287/292 | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01A | Brake booster dia. | mm | 177,8/203 | 177,8/203 | |||
| inch | 7/8 | 7/8 | |||||
| BE43.10-P-1002-01A | Boost factor | ≈5,6 | ≈5,6 | ||||
| BE43.10-P-1003-01A | Brake pipe line pressure | Intake pipe vacuum | Force on brake pedal | 50 N | bar | 8.5 to 13 | 7.5 to 11.5 |
| 0.75...0.8 bar | 100 N | bar | 28.5 to 35 | 25 to 31 | |||
| 150 N | bar | 48.5 to 5.7 | 42.5 to 50 | ||||
| 200 N | bar | 68 to 80 | 59.5 to 70 | ||||
| 250 N | bar | 84.5 to 100 | 74 to 87 | ||||
Pneumatic brake booster test specifications
| Number | Designation | Model 208.335/344/345/347/348/365/435/444/445/447/448/465 | Model 208.370/470 | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01A | Brake booster dia. | mm | 254 | 203/2286 | |||
| inch | 10 | 8/9 | |||||
| BE43.10-P-1002-01A | Boost factor | 4.5 | 5.6 | ||||
| BE43.10-P-1003-01A | Brake pipe line pressure | Intake manifold vacuum | Force on brake pedal | 50 N | bar | 13 to 23 | 8 to 18 |
| 0.75...0.8 bar | 100 N | bar | 32 to 44 | 33 to 40 | |||
| 150 N | bar | 48 to 62 | 52 to 61 | ||||
| 200 N | bar | 62 to 78 | 68 to 79 | ||||
| 250 N | bar | 75 to 91 | 82 to 95 | ||||
Pneumatic brake booster test specifications
| Number | Designation | Model 210.003/004/006/010/017/020/035/037/206/210/235/237,210.217 up to 01/97 (Teves), 210.061/261 without ESP | Model 210.015/016/025/026/045/053/055/063/065/070/072/081/082/210/215/216/225/226/245/265/270/272/281/282/606/610/617/663,210.217 from 01/97 (Teves), 202.033/093, 210.074/274, 210.061/261 with ESP | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01A | Brake booster dia. | mm | 254 | 203/2286 | |||
| inch | 10 | 8/9 | |||||
| BE43.10-P-1002-01A | Boost factor | 5.0 | 5.6 | ||||
| BE43.10-P-1003-01A | Brake pipe line pressure | Intake manifold vacuum | Force on brake pedal | 50 N | bar | 15 to 25 | 8 to 18 |
| 0.75...0.8 bar | 100 N | bar | 38 to 50 | 33 to 40 | |||
| 150 N | bar | 57 to 70 | 52 to 61 | ||||
| 200 N | bar | 72 to 83 | 68 to 79 | ||||
| 250 N | bar | 82 to 91 | 82 to 95 | ||||
Pneumatic brake booster test specifications
| Number | Designation | Model 211 with ABR [Adaptive Brake] | Model 215 | Model 216 | ||||
|---|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01A | Brake booster dia. | mm | 203/228 | 203/2286 | 265/265 | |||
| inch | 8/9 | 8/9 | 9.5/95 | |||||
| BE43.10-P-1002-01A | Boost factor | 7.0 | ≈ 6,3 | 8.9 | ||||
| BE43.10-P-1003-01A | Brake pipe line pressure | Intake manifold vacuum | Force on brake pedal | 50 N | bar | 28...45 | 22 to 30 | 27 to 37 |
| 0.75...0.8 bar | 100 N | bar | 55...70 | 42 to 52 | 47 to 65 | |||
| 150 N | bar | 80...95 | 60 to 70 | 75 to 90 | ||||
| 200 N | bar | 102...118 | 80...95 | 98 to 121 | ||||
| 250 N | bar | 115...122 | 100 to 120 | 114 to 138 | ||||
Pneumatic brake booster test specifications
| Number | Designation | Model 219 with ABR [Adaptive Brake] | Model 220 | Model 221 | ||||
|---|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01A | Brake booster dia. | mm | 203/228 | 203/2286 | 265/265 | |||
| inch | 8/9 | 8/9 | 9.5/95 | |||||
| BE43.10-P-1002-01A | Boost factor | 7.0 | ≈6,3 | 8.9 | ||||
| BE43.10-P-1003-01A | Brake pipe line pressure | Intake pipe vacuum | Force on brake pedal | 50 N | bar | 28...45 | 22 to 30 | 27 to 37 |
| 0.75...0.8 bar | 100 N | bar | 55...70 | 42 to 52 | 47 to 65 | |||
| 150 N | bar | 80...95 | 60 to 70 | 75 to 90 | ||||
| 200 N | bar | 102...118 | 80...95 | 98 to 121 | ||||
| 250 N | bar | 115...122 | 100 to 120 | 114 to 138 | ||||
Pneumatic brake booster test specifications
| Number | Designation | Model 414.700 | ||||
|---|---|---|---|---|---|---|
| BE43.10-P-1001-01A | Brake booster dia. | mm | 178/203 | |||
| inch | 7/8 | |||||
| BE43.10-P-1002-01A | Boost factor | ≈5,6 | ||||
| BE43.10-P-1003-01A | Brake pipe line pressure | Intake pipe vacuum | Force on brake pedal | 50 N | bar | 17 |
| 0.75...0.8 bar | 100 N | bar | 37 | |||
| 150 N | bar | 53 to 57 | ||||
| 200 N | bar | 68 to 75 | ||||
| 250 N | bar | 76 to 88 | ||||