LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2000 >> E430 Base >> Repair and Diagnosis >> Steering >> Electronic Steering >> Electronic Power Steering - 129, 140, 170, 202, 208 & 210 Chassis (With Abs, ASR, ETS & SPS) >> System Tests >> Preparation For Tests (Section 22)

Preparation For Tests (Section 22)

NOTE: When exchanging an ETS/SPS control module, the replacement module must have the code data entered via the HHT. Follow instructions on the HHT.
  1. Turn ignition OFF.
  2. Disconnect ASR/SPS or ETS/SPS control module (N47-1 or N47-2).
  3. Connect socket box (126 pole) with test cables as shown in connection diagram. See Fig 1 or Fig 2 .
Fig 1: Connection Diagram For 129 & 140 Chassis & 202 Chassis Without Control Module Box
G00280169Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 2: Connection Diagram For 170, 208, 210 Chassis & 202 Chassis With Control Module Box
G00280170Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals