Remove/install charge air pipe - AR09.41-P-1311HA

ENGINE 606.961 in MODEL 140.135 

ENGINE 606.962 in MODEL 210.025 /225 

Model 140 

Fig 1: Identifying Charge Air Pipe Components (Model 140)

Model 210 

Fig 2: Identifying Charge Air Pipe Components (Model 210)

Figure/Item, etc.	Notes on the work
	Charge air pipes or hoses	Always clean connecting points of hose clamps otherwise the charge air-may come off during operation!
	O-ring (110/11)	Replace
	Hose clamps		*BA09.41-P-1002-01A
	Rubber mount	On model 140.135 check and replace if necessary
B17	Intake air temperature sensor	Detach coupling, press back retaining clamps

Charge air pipe/charge air cooling