Separating/disconnecting electrical connectors in left footwell - AR54.15-P-1255-06EA

Unlock and disconnect electrical connectors (1) on rear of light module (N7-1).

Fig 1: Identifying Electrical Connectors And Rear Light Module
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Disconnect positive lead (2) from connector (X4).

Fig 2: Identifying Positive Lead And Connector
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Remove left side paneling in footwell and open wiring duct on rocker panel.
Disconnect wires (3) at connector (X12/5).
Separate connector (X25).
Disconnect electrical connector from stop lamp switch.
Return all disconnected and separated wires and wiring harnesses back to fuse and relay box.

Fig 3: Identifying Wires And Connector
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.