Interference on the radio - AF82.60-P-1060AG

MODEL 210 with CODE (352) COMAND operating and display system with CODE (750) MB Audio 30 radio with TP/RDS with CODE (752) MB Audio 30 radio without TP/RDS with CODE (753) MB Audio 10 CC radio with TP/RDS with CODE (754) MB Audio 10 CC radio without TP/RDS with CODE (756) MB Audio 10 CD radio with TP/RDS 

Damage code	Cause	Remedy:
	Routing of antenna/CAN lead	1 Route CAN lead and antenna lead separately.
	Interference may occur due to parallel routing of CAN lead (between instrument cluster and radio) and antenna lead. Pulsating interference during AM reception (MW, LW and feeble interference with short wave). The problems do not occur in every vehicle since the CAN leads in the vehicle are not always installed parallel to the antenna lead.	Do not install the above leads in parallel but as far apart from each other as possible.