Remove/install airbag unit on the steering wheel - AR91.60-P-0660M
MODEL 215, 220
Shown on model 220
| Remove/install | |||
| Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | AS91.00-Z-0001-01A | |
| Assessment of airbag and belt tensioner units in accident vehicles | AH91.00-P-0006-01B | ||
| Notes on performing repair, body work and welding on vehicles with airbags and ETR units | AH91.00-P-0002-01M | ||
| Legal regulations on handling and storing airbags and emergency tensioning retractors | AH91.00-P-0004-01A | ||
| 1 | Withdraw ignition key | ||
| 2 | Remove two screws (arrow) | ||
| Figure | |||
| Fig 2 | |||
| *BA91.60-P-1001-01A | |||
| 3 | Lift off the airbag unit from the steering wheel and detach the plug-in connector from the squib on the gas generator | ||
| Fig 4 | |||
| 4 | Remove airbag unit from steering wheel | If the airbag unit is replaced, the defective unit must be disposed of correctly: ↓ | |
| Notes on disposing of airbag and emergency tensioning retractor units | OS91.00-P-0001-01A | ||
| Make airbag units unusable | AR91.60-P-0611A | ||
| 5 | Install in the reverse order | ||
| 6 | Check the automatic resetting of the combination switch | ||
| 7 | Read out fault memory | ||
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| STAR DIAGNOSIS diagnosis system | *WH58.30-Z-1048-13A |
| Number | Designation | Model 215 | Model 220 | |
|---|---|---|---|---|
| BA91.60-P-1001-01A | Bolt, airbag to steering wheel | Nm | 8 | 8 |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation | |
|---|---|---|
| WH58.30-Z-1048-13A | STAR DIAGNOSIS diagnosis system, Compact Passenger Car | 6511 1801 00 |