Replacing front crankshaft radial sealing ring - AR03.20-P-3000RVK

ENGINE 113.990 in MODELS 211.076 /276 

ENGINE 113.991 in MODELS 215.374, 220.074 /174 

ENGINE 113.992 in MODEL 230.474 

ENGINE 113.995 in MODEL 230.472 

Fig 1: Identifying Front Crankshaft Radial Sealing Ring Remove/Install Components

	Remove/install
1	Remove belt pulley/vibration damper (3)		AR03.30-P-1600RVK
2	Remove crankshaft radial sealing ring (4)	Do not damage crankshaft and mounting hole for crankshaft radial seal (4). Use a clean cloth as a base. Press out with a screwdriver.
		Installation:  Install front crankshaft radial sealing ring (4).	AR03.20-P-3000-01B
		Sleeve	Figure
3	Install in the reverse order

Fig 2: Identifying Sleeve (119 589 01 14 00)