Remove/install exhaust system as from flange connection - AR49.10-P-7280M
ENGINE 275 in MODEL 215, 220
| Remove/Install | |||
| Lethal injuries are possible if vehicle slips off of lifting platform | Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury to skin and eyes from handling hot or glowing objects. | Wear protective gloves, protective clothing and if necessary protective glasses. | AS00.00-Z-0002-01A | |
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| 1 | Separate left and right flange connection (1, 2) | ||
| *BA49.10-P-1002-01G | |||
| 2 | Dismount reinforcement bridge (35) | *BA61.10-P-1002-01D | |
| 3 | Unhinge left and right rear muffler from exhaust rubber mounts (9/1, 9/2) | ||
| 4 | Lift out exhaust system | ||
| Inspecting | |||
| 5 | Check exhaust rubber mounts (9/1, 9/2) and sealing rings (3a, 3b) | ||
| Lubricant | *BR00.45-Z-1002-06A | ||
| 6 | Install in the reverse order | ||
| Inspecting | |||
| 7 | Inspect installation position and clearance of exhaust system | Align exhaust system. |
|
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury as working around the engine during start-up or while running may result in contusions and burns | Secure vehicle to prevent it from moving off by itself. Wear closed and tight-fitting work clothes. Do not grasp hot or rotating parts. |
||
| 8 | Conduct engine test run and inspect exhaust system for leaks |
| Number | Designation | Engine 275 | |
|---|---|---|---|
| BA49.10-P-1002-01G | Flange connection to exhaust pipes | Nm | 20 |
| Number | Designation | Model 215 | Model 220 | |
|---|---|---|---|---|
| BA61.10-P-1002-01D | Collar bolt of rear reinforcement bridge to frame floor | Nm | 23 | 23 |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1002-06A | Lubricant | A 000 989 01 60 |