Remove, install exhaust manifold - AR14.10-P-3915R

ENGINE 113.963 in MODEL 230.475 

ENGINE 113.992 in MODEL 230.474 

ENGINE 113.990 in MODEL 211.076 /276 

ENGINE 113.991 in MODEL 215.374, 220.074 

ENGINE 112.973 in MODEL 230.467 

ENGINE 113.995 in MODEL 230.472 

Fig 1: Identifying Exhaust Manifold Remove/Install Components

	Remove/install
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Risk of injury  to skin and eyes caused by handling hot or glowing objects.	Wear safety gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Remove exhaust system	Model 215, 220	AR49.10-P-7000AA
		Model 211	AR49.10-P-7000TB
		Model 230.467/ 475	AR49.10-P-7000R
		Model 230.472/ 474	AR49.10-P-7000RA
2.1	Detach from above air filter vertically from the cylinder head covers.	Model 230.467/ 475
2.2	Remove air filter housing	Model 211, 215, 220, 230.472 /474	AR09.10-P-1150SVK
3	Remove ignition coils		AR15.12-P-2003A
4	Remove exhaust manifold (156)	Installation:  Replace nuts (156/1) and gaskets (156/5).
			*BA14.10-P-1001-01B
		If bolts at flange connection of exhaust manifold or exhaust pipes are stiff or thread damaged: ↓
		Replace rivet nuts in exhaust manifold.	AR49.10-P-5531-01DA
		Caulking bolt	Fig 2
			*BA14.10-P-1002-01B
5	Install in the reverse order

EXHAUST MANIFOLD

Fig 2: Identifying Cocking Bolt (103 589 01 39 00)