Display in instrument cluster: "Air suspension" or "ABC - Visit workshop" - AF54.18-P-8000A

MODEL 215.### ## up to 003842, 220.### ## up to 063500 

Damage code	Cause	Remedy
32 074 22 Text in message field: "K/Z connector, front axle level sensor"	Engine wiring harness may be damaged by the wiper linkage.	Expose wiring harness in the area of the wiper linkage, for this purpose: ↓
32 564 22 Text in message field: "K/Z connector, suspension/ damping system control module"	DTC's C1000 or C1133 or C1132, C1133, C1135.	2 Remove 4 expansion rivets (1)
		3 Pull water repellent (2) out of bead upward (arrow).
		4 Check wiring harness for damage.
		Wiring harness damaged. ↓
		5 Repair wiring harness.	SI00.19-P-0001A
		6 Fasten wiring harness with tie strap. Wiper linkage should not hit
		7 Install water repellent.
		8 Erase fault memory

Fig 1: Identifying Expansion Rivet And Water Repellent