Removing and installing rear window noise suppression capacitor - AR82.62-P-7385I

MODEL 215, 220 

Illustrated on model 220 

Fig 1: Identifying Electrolytic Capacitor, Electrical Connectors, Screws And Nuts

	Removal, installation
1	Remove paneling on C-pillar	Model 215	AR68.30-P-4490N
		Model 220	AR68.30-P-4490M
2	Unscrew screws (1) and disconnect electrical connections (2) from electrolytic capacitor (rear window noise suppresser, (C3)
3	Unscrew nut (3) and remove rear window noise suppresser capacitor from C-pillar
4	Install in opposite order