Removing and installing intake manifold - AR09.20-P-1310H

ENGINE 604, 605.910 /912

Engine 605.910/912 shown

Fig 1: Identifying Intake Manifold Remove/Install Components - Engine 604, 605.910 /912

G04715090

Figure/Item, etc.	Notes on the work
3	Crankcase ventilation
6/1	Cylinder head cover pocket cover	When assembling ensure that the leak fuel hose from No. 1 cylinder to the return flow hose is correctly routed
100	Intake manifold	Cover the intake ports after detaching
100/1, 100/2	Bolts		*BA09.20-P-1001-01A
100/3	O-rings	Replace
100/4	Vacuum line	Pull off, push on
	Intake line bracket modified	Fatigue limit increased	BT09.00-P-9402-01H

TORQUE SPECIFICATION

INTAKE MANIFOLD

Number	Designation			Engine 604, 605
BA09.20-P-1001-01A	Bolt, intake manifold on cylinder head	M5	Nm	10
BA09.20-P-1001-01A	Bolt, intake manifold on cylinder head	M7	Nm	20