Removing and installing front floor covering (left) - AR68.20-P-2050E
MODEL 202
| Removal, installation | |||
|---|---|---|---|
| 1 | Remove cover below instrument panel (left) | AR68.10-P-1500E | |
| 2 | Move left front seat all the way back | ||
| 3 | Press off cover (1) above screw (2) | ||
| 4 | Unscrew screw (2) | ||
| 5 | Remove panelling (3) | ||
| 6 | Unscrew nuts (4) and lift accelerator pedal (5) over studs | ||
| 7 | Lift floor covering (6) at rear and remove | ||
| 8 | Reinstall in opposite order |