Notes on controlled deployment of airbag, side-bag and emergency tensioning retractor units - AH91.60-P-0611-02P

Models 163, 164, 168, 170, 199, 202, 203, 208, 209, 210, 215, 220, 230, 240, 251, 414, 461, 463 

The unattached airbag, side-bag, window-bag and emergency tensioning retractor units should, if possible, be deployed in a scrapped vehicle (with doors closed).

Position the unattached airbag, side-bag, window-bag and emergency tensioning retractor units in the footwell with the discharge hole pointing upwards.

In exceptional cases - i.e. when there is no suitable vehicle around to use - the airbag, side-bag, window-bag and emergency tensioning retractor units can be placed in a transport container for replacement engines and deployed there (with the cover sealed).

The adapter line and the deployment device are to be ordered through the usual replacement part channels.

The 2-pin plug connection becomes damaged when deploying the unattached airbag, side-bag, window-bag and emergency tensioning retractor units.

Therefore, the adapter cable must be pulled out of the plug and replaced.