Removing and installing rear engine mount - AR22.10-P-1160AO

ENGINE 120 in MODEL 129, 140 

Fig 1: Identifying Rear Engine Mount Remove/Install Components (Engine 120 With Transmission 722.3)

Fig 2: Identifying Rear Engine Mount Remove/Install Components (Engine 120 With Transmission 722.6 (NAG))

	Removing, installing
1	Support transmission
2.1	Detach cable straps of the kickdown electric cable from engine carrier (13)	Model 129 with transmission 722.3
3.1	Detach cable straps of the kickdown and O 2 sensor electric cables from engine carrier (13)	Model 140 with transmission 722.3
4	Remove engine carrier (13)
5	Remove engine mount (11)	Engine mounts with transmission 722.3: the installation position is fixed by a slot (arrow) on the engine mount (11) and by a notch (arrow) on the bracket
			*BA22.10-P-1002-01B
			*BA22.10-P-1003-01B
			*BA22.10-P-1008-01B

ENGINE SUSPENSION, ENGINE MOUNTS, ENGINE CARRIER

Number	Designation		Engine 120 in model 129, 140 with transmission 722.6 (NAG)	Engine 120 in model 129, 140 with transmission 722.3
BA22.10-P-1002-01B	Bolt of rear engine mount to engine carrier	Nm	25	30
BA22.10-P-1003-01B	Bolt of rear engine carrier to body	Nm	40	40
BA22.10-P-1008-01B	Bolt of rear engine mount to bracket	Nm	40	50