Removing and installing charge air distribution pipe - AR09.41-P-1310H

ENGINE 605.960 /962 

Fig 1: Identifying Charge Air Distribution Pipe Remove/Install Components - Engine 605.960 /962

Fig. item, etc.	Work instructions
6/1	Trim panel of cylinder head cover	When installing, ensure that the leak fuel hose is correctly routed from cylinder 1 to the return hose.
100/1	Bolts		*BA09.41-P-1001-01A
100/3	O-rings	Replace.
100/4	Vacuum pipe	Disconnect, fit on.
110/1	Charge air distribution pipe	Cover over the intake ports after taking off.

CHARGE AIR PIPE/CHARGE AIR COOLING

Number	Designation			Engine 605.960/962
BA09.41-P-1001-01A	Bolts to charge air distribution pipe	M5	Nm	10
		M7	Nm	20