Carry out distance and comparison measurements on rear axle - AR40.30-P-0402-02A

TEST VALUES FOR DISTANCE AND COMPARISON MEASUREMENTS ON REAR AXLE

Number	Designation			Model 129	Model 170	Model 202
BE40.30-P-1001-05B	Dimension	H1	mm	4	4	4
		H2	mm	3	3	3
		H4	mm	4	4	4
		H5	mm	6	6	6
		H6	mm	1070 (± 2)	1022 (± 2)	1022 (± 2)
		H7	mm	702 (± 2)	654 (± 2)	654 (± 2)
		H8	mm	3	3	3
		H9	mm	3	3	3
		See picture in		AR40.30-P-0402-02A	AR40.30-P-0402-02A	AR40.30-P-0402-02A

TEST VALUES FOR DISTANCE AND COMPARISON MEASUREMENTS ON REAR AXLE

Number	Designation			Model 208	Model 210
BE40.30-P-1001-05B	Dimension	H1	mm	4	4
		H2	mm	3	3
		H4	mm	4	4
		H5	mm	6	6
		H6	mm	1022 (± 2)	1082 (± 2)
		H7	mm	654 (± 2)	714 (± 2)
		H8	mm	3	3
		H9	mm	3	3
		See picture in		AR40.30-P-0402-02A	AR40.30-P-0402-02A

Fig 1: Identifying Telescopic Measuring Rod (124 589 01 19 00)

Fig 2: Identifying Telescopic Measuring Rod (124 589 02 19 00)

Fig 3: Identifying Mount (170 589 00 63 00)

Fig 4: Identifying Set Of Measurement Fixtures (140 589 09 63 00)

Fig 5: Identifying Connecting Pieces (124 589 08 63 00)

Comparison dimension " H1 " measured from the check bore " K " to the center of the hexagon bolt of the rear bearing of the thrust arm (5) on the wheel carrier left to right.
Use telescopic measuring rod (06) 124 589 02 19 00 with measuring tips (024c)

140 589 09 63 29.

Fig 6: Measuring From Check Bore To Center Of Hexagon Bolt Of The Rear Bearing Of The Thrust Arm On The Wheel Carrier
Comparison dimension " H2 " measured from the check bore " K " to the hexagon bolt or torx bolt of the front bearing of the rear axle carrier left to right. Screw the hexagon bolts or torx bolts out or in if necessary and check for bending.
Vehicles with hexagon bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 11.

Vehicles with hexagon bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 04. Measured to the center of the Torx bolt head.

Fig 7: Measuring From The Check Bore To The Hexagon Bolt Or Torx Bolt Of The Front Bearing Of The Rear Axle Carrier
Comparison dimension " H4 " measured from the check bore " K " to the center of the hexagon bolt of the front thrust arm on the rear axle carrier left to right.
Use telescopic measuring rod (06) 124 589 02 19 00 with measuring tips (024d)

140 589 09 63 03.

Fig 8: Measuring From The Check Bore To The Center Of The Hexagon Bolt Of The Front Thrust Arm On The Rear Axle Carrier
Comparison dimension " H5 " measured from the check bore " K " to the hexagon bolts or torx bolts of the rear bearing of the rear axle carrier left to right. Screw the hexagon bolts or torx bolts out or in if necessary and check for bending.
Detach fuel pump cover (gasoline engines).

Vehicles with hexagon bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 11.

Vehicles with hexagon bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 04. Measured to the center of the Torx bolt head.

Fig 9: Measuring From The Check Bore To The Hexagon Bolts Or Torx Bolts Of The Rear Bearing Of The Rear Axle Carrier
Distance dimension " H6 " measured at the hexagon bolts or torx bolts of the front bearing of the rear axle carrier.
Vehicles with hexagon bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 11.

Vehicles with hexagon bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 04

140 589 09 63 03. Measured to the center of the Torx bolt head.

Fig 10: Identifying Dimension Between The Hexagon Bolts Or Torx Bolts Of The Front Bearing Of The Rear Axle Carrier
Distance dimension "H7 " measured at the hexagon bolts or torx bolts of the rear bearing of the rear axle carrier.
Vehicles with hexagon bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 11.

Vehicles with hexagon bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 04

140 589 09 63 03. Measured to the center of the Torx bolt head.

Fig 11: Identifying Dimension Between Hexagon Bolts Or Torx Bolts Of The Rear Bearing Of The Rear Axle Carrier
Distance dimension " H8 " measured between the hexagon bolts or torx bolts of the front and rear bearing of the rear axle carrier.
Vehicles with hexagon bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 11.

Vehicles with torx bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 04 and

140 589 09 63 03 combined. Measured to the center of the torx bolt head.

Fig 12: Identifying Dimension Between The Hexagon Bolts Or Torx Bolts Of The Front And Rear Bearing Of The Rear Axle Carrier
Comparison dimension " H9 " measured diagonally between the hexagon bolts or torx bolts of the front and rear bearing of the rear axle carrier left to right.
Vehicles with hexagon bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 11.

Vehicles with torx bolts

Use telescopic measuring rod (06) 124 589 02 19 00 with measuring bolts (024h)

140 589 09 63 04 and

140 589 09 63 03 combined. Measured to the center of the Torx bolt head.

Fig 13: Identifying Dimension Diagonally Between The Hexagon Bolts Or Torx Bolts Of The Front And Rear Bearing Of The Rear Axle Carrier Left To Right