Pulling off and pressing on grooved ball bearing connecting flange - AR35.31-P-0540-04A

Fig 1: Identifying Puller (001 589 50 33 00)

Fig 2: Identifying Spring Collet (140 589 00 34 00)

Disconnect grooved ball bearing from connecting flange.

Fig 3: Identifying Connecting Flange

Pressing on grooved ball bearing

On vehicles with ASD, the chamfer or groove (arrow) must point towards the shaft. An installed position is not specified on vehicles with ASR.
Press on deep-groove ball bearing (33c) using suitable tube (033c) until it abuts the flange.
Location of connecting flange on ASD version

Fig 4: Locating Connecting Flange On ASD Version