Remove/install ignition coils - AR15.12-P-2003G

ENGINE 104.996 /94 /99, 111.920 /940 /941 /944 /960 /961 (except, 104.990) 

Engine 104 

Fig 1: Identifying Ignition Cable Duct Cover And Cable Duct - Model 124, Engine 104

Shown on Engine 111 

Fig 2: Identifying Connector And Engine/Ignition Coil And Ignition Cables - Shown On Engine 111

Shown on Engine 111 

Fig 3: Identifying Spark Ignition Coil 1st And 4th Cylinder (HFM/PMS) And Connector - Shown On Engine 111

Connection schema ignition coil/ignition cables 

Fig 4: Identifying Connection Schema Ignition Coil/Ignition Cables

Fig. item, etc.	Work instructions
	Hazard  from contact with parts conducting high voltages.	Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry out work on the ignition system.	AS15.10-Z-0001-01A
	Notes on avoiding damage to ignition system	Engine 111 with PEC fuel injection and ignition system	AH15.10-P-0002-01B
		Engine 104, 111 with HFM-SFI fuel injection and ignition system	AH15.10-P-0002-01C
		Engine 104, 111, 112, 113, 119, 120 with ME-SFI fuel injection and ignition system	AH15.10-P-0002-01D
		Engine 103, 104, 119 with CFI continuous fuel injection system	AH15.10-P-0002-01E
		Engine 104, 119, 120 with LH-SFI fuel injection system	AH15.10-P-0002-01F
T1/1, T1/2	Unbolt Ignition coils	for better assembly of lines circuit 1 and 15