Removing and installing expansion reservoir - AR47.10-P-8021E

MODEL 202 up to 31.3.96 

Fig 1: Identifying Expansion Reservoir, Vent Hose And Vent Pipe

	Removal, installation
	Risk of explosion  from ignition. Risk of poisoning  from inhaling and swallowing fuel. Risk of injury  as a result of fuel coming into contact with skin and eyes.	No fire, naked flame or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
1	Remove filler neck, install		AR47.10-P-7541E
2	Push vent hose (91/2a) over vent pipe (91/2)
3	Push vent pipe (91/2) forward
4	Take out expansion reservoir (93)	To do this, tilt expansion reservoir (93) down from above (arrow)
5	Install in the reverse order	If no expansion reservoir of the same version is available for installation, install expansion reservoir of new version	AR47.10-P-7571-01E
		Model 202.0: install guide funnel	AR47.10-P-7571D
	Expansion reservoir with filler neck modified	Model 202 as of 1.3.96	BT47.10-P-0003-01A