Measure absolute angle at rear axle housing - AR41.10-P-0085-03A

Fig 1: Identifying Steel Straightedge (140 589 11 21 00)

Fig 2: Identifying Measuring Socket (140 589 32 63 00)

The vehicle must be standing on its wheels for the measurement.

1. Clean contact surfaces (arrows) at rear axle housing to remove paint and/or gasket residuals and remove uneven material using a suitable tool.
   Fig 3: Locating Contact Surfaces And Rear Axle Housing

   
2. Position measuring socket (010d) with steel straightedge at rear axle housing.
3. Read off and note down absolute angle (e.g. 2° 40').

   

   Always read off absolute angle at steel straightedge from left-hand side of vehicle.

   Fig 4: Measuring Absolute Angle At Rear Axle Housing