Selector lever locks up - AF42.10-P-6002A

MODEL 170, 202, 208, 210 

MODIFICATION NOTES

9.3.00

Supersedes STIP 27.60-005 dated 8.3.00

Damage code	Cause	Remedy
54 311 73	It is possible that the electronic selector lever module (EWM) does not receive a signal from the stop lamp switch.	1 Replace stop lamp switch.	AR42.10-P-0040A
	Occasionally it is not possible to move the selector lever on vehicles with touch shift out of position "P" (brakes actuated). NO DTC stored in EWM.	It is only permissible to replace the center shifter console when an applicable DTC is stored.