Removing and installing cover on tilting/sliding roof - AR77.20-P-0500E
MODEL 202 with CODE (412b) Electric tilting/sliding roof with CODE (414a) Glass electric tilting/sliding roof
| Removal | |||
|---|---|---|---|
| 1 | Remove cover | Electrically operated steel tilting/sliding roof (code 412b) | AR77.20-P-0500-01EA |
| Electrically operated glass tilting/sliding roof (code 414a) | AR77.20-P-0500-01EB | ||
| Installation | |||
| 2 | Install cover | Electrically operated tilting/sliding roof (code 412b) | AR77.20-P-0500-02EA |
| If cover does not hold in tilting/sliding roof panel ↓ | |||
| Replace lower section of clips | AR77.20-P-0500-03EA | ||
| Electrically operated glass tilting/sliding roof (code 414a) | AR77.20-P-0500-02EB | ||
| 3 | Close tilting/sliding roof | ||
| 4 | Check tilting/sliding roof for proper function | When the glass tilting/sliding roof (code 414a) is opened to the rear the cover (2) should be pulled along. |
SHOP-MADE TOOL
| Number | Designation |
|---|---|
| WF77.20-1000-01Z | Puller hook for bottom section of clips for tilting/sliding roof cover |