Removing and installing deflector for retaining hook - AR88.40-P-3300B
MODEL 202 as of 1.11.93 up to 31.1.94
MODIFICATION NOTES
| 21.10.99 | Replaces SI 88/35 dated 21.4.94 | Remove SI 88/35 from your file. |
| Removing, installing | |||
| 1 | Remove deflector. | ||
| Deflector for retaining hook with additional installation hook | Model 202 | BT88.40-P-0001-01A | |
| 2 | Drill out present 3.2 mm diameter hole (arrow) on upper frame cross member. | Use approx. 8 mm dia. bit. | |
| 3 | Deburr hole. | ||
| 4 | Paint hole to match color of car. | ||
| 5 | Install deflector (C). |