Removing and installing infrared remote control module - AR80.30-P-4400E

MODEL 202 up to 30.11.94 with CODE (880a) Locking system with infrared remote control 

MODEL 202 as of 1.8.96 up to 31.5.97 with CODE (491) USA version 

Fig 1: Identifying Infrared Remote Control Module Remove/Install Components (1 Of 2)

	Removal, installation
1	Disconnect ground cable at battery
2	Open trunk lid
3	Remove trunk mat (1)
4	Unscrew plastic screws (2)
5	Remove cover for control modules (3)
6	Press catch (4) on control module panel and remove RCL control module (N54) from bracket	After installation ↓ Perform function check
		Model 202 up to 11/94	dh0404pa00011x
		Models 202 as of 08/96, 202.083	AD80.30-P-1000AZ
7	Disconnect coupling at RCL control module (N54)	When replacing the control unit or the transmitter key, always indicate the locking mechanism number since both parts are matched to one another.
8	Install in opposite order