Removal and installation of window molding on coupe roof, side and rear - RA68001290420X(68-420)
Coupe roof removed (operating instructions) and turn over
Operation number of the operation texts and work units or standard texts and flat rates respectively
| Screws (1) 3 each | screw out/screw in |
| Reveal molding (2) press off of window frame with plastic wedge (arrows at left) Retaining clamps (center arrow) |
press off toward center of roof and unhook downward |
| Screws (3) 4 each | screw out/screw in |
| Reveal molding (4) | remove/install |
Installation note
Before installing window molding in coupe roof insert retaining clamps (4 each).