Removing and installing paneling on glass roof - AR68.30-P-4370C

MODEL 129 with CODE (415a) Glass roof 

Fig 1: Identifying Paneling On Glass Roof Components

	Removal, installation
1	Remove glass roof, turn over and put down on soft surface to avoid damaging glass and paint	See Owner's Manual
2	Unclip paneling on B-pillar (1) with installation wedge (2)		Fig 2
3	Remove covering on side window (3) by unscrewing screws (4)
4	Remove covering on rear window (5) by unscrewing screws (6)
5	Press cover (7) off of grab handle (8) with long wedge and remove grab handle (8) by unscrewing screws (9)		Fig 3
6	Unclip roof side paneling (10) toward inside with installation wedge (2)	Installation  : Check retaining clips (4 each) on rear of paneling, replace if necessary
			Fig 2
7	Unclip front roof paneling (11) toward inside with installation wedge (2)		Fig 2
8	Install in opposite order

Fig 2: Identifying Installation Wedge (110 589 03 59 00)

Fig 3: Identifying Long Wedge (115 589 03 59 00)