Removing and installing relays and control modules - AR54.15-P-1300CS: Notes
MODEL 129
Shown on model 129 as of 01.09.95
OPERATION NO. OF OPERATION TEXTS OR STANDARD TEXTS AND FLAT RATES
| Op. no. | Operation text |
| Removing, installing | |||
| 1 | Disconnect ground cable from battery | AR54.10-P-0003A | |
| 2 | Remove right engine compartment cover | ||
| 3.1 | Remove right front windshield molding | Model 129 as of 01.09.95 | |
| 4 | Unscrew bolts (1) and remove cover (2) | ||
| 5 | Remove control modules from control module box (F23/1) | AR54.15-P-1300-02CS | |
| Figure | |||
| 6.1 | Unlock and disconnect couplings from control modules | Model 129 as of 01.09.95 | |
| 7.1 | Unscrew bolts (3) | Model 129 as of 01.09.95 | |
| 8.1 | Remove mounts (4) with control modules from control module box (F23/2) | Model 129 as of 01.09.95 | |
| 9 | Install in reverse order |