Removing and installing side airbag sensor - AR91.60-P-0710D

MODEL 140 with CODE (292) left and right front side airbag 

Illustration shows right side of vehicle 

Fig 1: Identifying Right Side Airbag Sensor, Electric Socket And Attaching Bolts

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removing, installing
1	Disconnect battery	Important instructions for performing repair, body work and welding on vehicles with airbags and emergency tensioning retractors Model 129 as of 1.7.93, 163, 168, 170, 202 as of 1.7.93, 208, 210, 463, 638, 901, 902, 903, 904	AH91.00-P-0002-01B
2	Withdraw ignition key
3	Remove entrance plate
4	Turn over floor covering to the front
5	Unplug electric socket (1)
6	Unscrew mounting screws (2)
7	Take out side airbag sensor (A53 or A54)	Installation:  When installing, the arrow in the sensor must point out.
8	Install in the reverse order
9	Carry out diagnosis	see Diagnosis Manual